不同叶龄蘖、穗氮肥组合对粳稻产量及氮素利用的影响

以主茎叶片数不同的粳稻品种吉粳88 (14片)、沈农265 (15片)和沈农1401 (16片)为试材,采用大田筒栽方式,在总施氮量225kghm–2及轻简施肥(基肥、蘖肥、穗肥)模式基础上,设置基蘖肥∶穗肥6∶4和8∶2两种施肥比例,并分设不同源、库叶龄期施氮组合即不同叶龄蘖、穗肥精确施氮组合。分析了不同源库期氮肥运筹模式对水稻农艺性状、产量及氮素利用特性的影响。结果表明:(1)在有效穗数、分化颖花数、产量和氮素利用率方面,吉粳88、沈农265、沈农1401不同氮肥运筹下最佳蘖、穗肥叶龄组合均为6∶4显著高于8∶2。(2)不同氮肥运筹下,吉粳88在8叶(叶龄指数57.1%)、沈农265在9叶(叶龄指数60.0%)、沈农1401在10叶(叶龄指数62.5%)时,即叶龄指数在60%左右时,施用蘖肥效果最佳,最终穗数最多,对保蘖起主要作用;吉粳88在11叶(叶龄指数78.6%)、沈农265在12叶(叶龄指数80.0%)、沈农1401在13叶(叶龄指数81.3%)时,即叶龄指数在80%左右时,施用穗肥效果最佳,最终穗粒数最多,对促花起主要作用。(3)吉粳88-6∶4 (8, 11),沈农265-6∶4 (9, 12),沈农1401-6∶4 (10, 13) 3组处理,在产量、氮素积累量、氮素吸收利用率、农学利用率及偏生产力等方面,显著高于同品种不同叶龄蘖、穗氮肥组合中的其他处理。因此,适当延迟蘖肥施用叶龄期(叶龄指数60%左右)、提前穗肥施用叶龄期(叶龄指数80%左右)同时增加穗肥施用比例,既可以显著提高氮素积累量、氮素吸收利用率、农学利用率及偏生产力,又能显著促进成穗率的提高和颖花数的分化,达到保蘖促花的双重作用,实现优源、扩库、充实的目标,从而获得高产。     

水产类上市公司经营绩效评价及影响因素分析——基于DEA-Tobit模型

2012年以来水产类上市公司经营面临困局.该研究根据11家水产类上市公司2012～2014年的面板数据,首先运用DEA模型进行生产效率的评价,研究发现水产类上市公司的技术效率、纯技术效率和规模效率3年平均值都较高,但2014年整体绩效有走低的趋势;然后运用Tobit模型,分析经营绩效的影响因素,发现公司总资产周转率和高等教育人员比例与技术效率正相关,而研发人员比例与技术效率不相关.最后,从资产整合、加强营销、重视人才和发展休闲渔业等方面提出了提高水产类上市公司经营绩效的对策建议.     

Identification and evaluation of high nitrogen nutrition efficiency in rapeseed (Brassica napus L.) germplasm

To establish identification and evaluation methods of N (nitrogen) absorption and utilization of rapeseed (Brassica napus L.), difference of N nutrition efficiency (NNE) among rapeseed germplasms and relationship between NNE and plant traits under various N application rates were analyzed in this research. Pot cultivating experiments were conducted to investigate NNE with 3 ​N application rates in soil (0.05, 0.2 and 0.3 ​g/kg). A total of 12 rapeseed germplasms were planted, nitrogen absorption efficiency (NAE) and nitrogen utilization efficiency (NUE) in seedling stage, bolting stage, initial flowering stage, final flowering stage, and maturity stage were obtained. Results showed that bolting stage was the best period for NAE identification and evaluation. Low N application rate in soil (0.05 ​g/kg) was the best for NAE, and the indirect indexes were basal stem diameter, plant root dry weight and above ground plant dry weight. Maturity stage was the best period for NUE identification and evaluation. High N application rate in soil (0.3 ​g/kg) was the best for NUE, and indirect indexes were above ground plant dry weight and basal stem diameter. N application rates of 0.05 ​g/kg in soil was the best for nitrogen harvest index at maturity stage, and indirect indexes was number of pods per plant. Plant traits of rapeseed germplasms affected NNE. Higher basal stem diameter, plant root dry weight and above ground plant dry weight at bolting stage under low N application rate were important characteristics of N absorption in rapeseed. Higher above ground plant dry weight and basal stem diameter at maturity stage under high N application rate were important characteristics of N utilization. Higher number of pods per plant at maturity stage under lowe N application rate was an important characteristic of N harvest index. These results provided a reliable index for N management and provided theoretical basis for guiding rapeseed breeding.     

芝麻不同生育阶段需水特性与干旱灌溉应用研究

探讨芝麻不同生育阶段需水特性与干旱灌溉水分生产效率,为芝麻高产栽培的合理灌溉和水分管理提供科学依据,2013-2018年在安徽、新疆等不同地域,选用6个芝麻主栽品种,开展芝麻不同生育阶段需水特性和灌溉水利用研究。结果表明：盆栽芝麻的全生育期蒸腾需水量平均为283.59mm,品种间差异大,形成100kg芝麻籽粒蒸腾需水量为263.56mm(175.7t/666.7m²),苗期、蕾期、初花期、盛花期、终花期、成熟期的蒸腾需水量分别为18.76mm、21.91mm、21.03mm、149.28mm、71.21mm和34.79mm,蒸腾模系数为5.89%、7.21%、6.85%、47.07%、23.93%和9.05%；盛花期最大,出苗期最小。池栽芝麻全生育期需水量531.36mm,其中株间蒸发量、蒸腾量分别占全生育期需水量的46.1%和53.9%；株间蒸发量最大的时期为苗期；蒸腾量最大的时期为花期。芝麻苗期、花期和成熟期需水模系数平均为18.65%、66.79%和14.56%。合肥基地出苗期、临泉基地花期遇旱喷灌,水分生产效率高达0.61kg/m³和0.65kg/m³；新疆精河基地按需滴灌处理比传统滴灌方式的水分生产效率提高43.28%,节水19.61%,这对水资源匮乏的新疆干旱区来说意义重大。芝麻需水量与栽培条件、品种、气温(r＝0.99)等密切相关。在芝麻不同生育阶段遇旱灌溉是提高水分生产效率和产量的关键措施之一。     

华南地区主要蔬菜磷钾肥料利用率研究现状

总结了近年来在华南地区主要蔬菜生产区进行的田间试验结果,分析了施磷钾肥对叶菜、瓜类、豆类蔬菜产量和养分吸收的影响,以及目前条件下华南地区蔬菜磷钾肥的偏生产力、农学效率、肥料表观利用率、生理利用率、肥料贡献率和地力贡献率。结果表明,叶菜、瓜类和豆类蔬菜施用磷钾肥均能促进蔬菜产量的增加和磷钾养分的吸收。叶菜、瓜类、豆类蔬菜磷肥偏生产力分别为781.9 kg/kg、257.6 kg/kg、211.9 kg/kg,农学效率为30.5 kg/kg、64.1 kg/kg、23.1 kg/kg,表观利用率为17.2%、9.7%、6.1%,生理利用率为222.3 kg/kg、370.6 kg/kg、292.7kg/kg,肥料贡献率为16.4 %、19.4%、12.9%,地力贡献率为83.6 %、80.4%、87.1%。叶菜、瓜类、豆类蔬菜钾肥偏生产力分别为298.8 kg/kg、164.3 kg/kg、165.8 kg/kg,农学效率为29.5 kg/kg、39.5 kg/kg、25.8 kg/kg,表观利用率为24.8%、24.3%、13.0%,生理利用率为152.3 kg/kg、218.6 kg/kg、229.1kg/kg,肥料贡献率为13.8 %、21.6%、17.4%,地力贡献率为86.2 %、78.3%、82.6%。分析肥料利用率分布频率可以看出,磷肥表观利用率＜20%的试验样本和钾肥表观利用率＜30%的试验样本均占总样本的80%以上,表明目前试验条件下各类蔬菜的磷钾肥利用率较低,生产上需同时解决蔬菜产量及肥料利用效率提高的问题。     

关于PA-250感应电机效率提高的研究

随着社会经济的飞速发展,对于节能环保的要求越来越高,传统的G/M代码已经成为现代先进制造技术的瓶颈。而基于STEP标准的STEP-NC将为现代CNC的高速和高精度加工提供条件。     

磷酸铵镁堆肥产品养分释放特性及其肥效研究

为了研究磷酸铵镁堆肥产品的氮磷养分释放特性及其肥效,分别采用土柱淋溶方法及盆栽试验研究了磷酸铵镁堆肥(MAPC)产品的氮磷养分释放特性及对油菜的肥效,并与普通化肥(CCH)、普通堆肥(CCO)、磷酸铵镁肥(MAP)3种肥料进行对比。结果表明:在整个淋溶过程中,CCH和MAPC处理淋溶液的总氮及总磷浓度均较其他处理高;MAP肥具有缓释性,且堆肥对其养分释放具有促进作用;CCO处理的养分释放最慢。在最后一次淋洗(即第5次)后,总氮及总磷养分浓度排序均为:CCHMAPCMAPCCO。盆栽试验18 d后油菜快速生长,且与对照(不施肥)处理相比,MAP和MAPC处理能显著提高油菜的株高及生物量。在45 d盆栽试验结束时,CCH、CCO、MAP和MAPC处理的生物量分别是对照处理的14.8、4.8、20.5倍和16.0倍。MAP处理能显著提高油菜的养分含量,TN和TP含量分别比对照提高了2.24 g·kg~(-1)和1.54 g·kg~(-1)。研究表明,4种肥料均可改善油菜的生长发育情况,且MAP和MAPC的肥效优于CCH和CCO,在堆肥中利用鸟粪石结晶原理可固定部分氮磷元素,提高堆肥产品肥效。     

Intensive organic vegetable production increases soil organic carbon but with a lower carbon conversion efficiency than integrated management

Intensive vegetable production in greenhouses has rapidly expanded in China since the 1990s and increased to 1.3 million ha of farmland by 2016, which is the highest in the world. We conducted an 11‐year greenhouse vegetable production experiment from 2002 to 2013 to observe soil organic carbon (SOC) dynamics under three management systems, i.e., conventional (CON), integrated (ING), and intensive organic (ORG) farming. Soil samples (0–20 and 20–40 cm depth) were collected in 2002 and 2013 and separated into four particle‐size fractions, i.e., coarse sand (> 250 µm), fine sand (250–53 µm), silt (53–2 µm), and clay (< 2 µm). The SOC contents and δ¹³C values of the whole soil and the four particle‐size fractions were analyzed. After 11 years of vegetable farming, ORG and ING significantly increased SOC stocks (0–20 cm) by 4008 ± 36.6 and 2880 ± 365 kg C ha^?1 y^?1, respectively, 8.1‐ and 5.8‐times that of CON (494 ± 42.6 kg C ha^?1 y^?1). The SOC stock increase in ORG at 20–40 cm depth was 245 ± 66.4 kg C ha^?1 y^?1, significantly higher than in ING (66 ± 13.4 kg C ha^?1 y^?1) and CON (109 ± 44.8 kg C ha^?1 y^?1). Analyses of ¹³C revealed a significant increase in newly produced SOC in both soil layers in ORG. However, the carbon conversion efficiency (CE: increased organic carbon in soil divided by organic carbon input) was lower in ORG (14.4%–21.7%) than in ING (18.2%–27.4%). Among the four particle‐sizes in the 0–20 cm layer, the silt fraction exhibited the largest proportion of increase in SOC content (57.8% and 55.4% of the SOC increase in ORG and ING, respectively). A similar trend was detected in the 20–40 cm soil layer. Over all, intensive organic (ORG) vegetable production increases soil organic carbon but with a lower carbon conversion efficiency than integrated (ING) management.     

林木氮素吸收偏好性及其形成机制研究进展

森林土壤中可被林木吸收利用的氮（N）素主要以铵态氮（NH₄+-N）和硝态氮（NO₃--N）的形态存在。受全球气候变暖、氮沉降和人类活动等因素的影响，NH₄+和NO₃-的分布存在很大的时间波动性和空间异质性，且NH₄+-N和NO₃--N亏缺已成为限制林地生产力的主要因素。在森林土壤N亏缺和N异质分布的逆境中，在林木长期进化过程中形成了对不同形态N素的吸收偏好，且这种吸收偏好会随生长环境条件而发生改变。特别是对于NH₄+和NO₃-这2种主要形态的偏好选择性已被证明是决定林木生产力、竞争、共存和生态演替的重要因素之一。对不同树种在N异质分布环境下的N吸收偏好和形成机制的研究，是揭示林木N素营养遗传特性和提高林地N素利用效率的关键。文中从森林土壤中N的主要形态及其分布特征、林木对不同形态N素的吸收偏好和形成机制、林木N吸收偏好的影响因素3个方面进行总结阐述，并对未来研究方向进行展望，以期为我国人工林培育中不同树种的造林配置和合理N素施肥技术提供理论依据和参考。